Search for: All records

Cryogenic calorimetric experiments to search for neutrinoless double-beta decay (0νββ) are highly competitive, scalable, and versatile in isotope choice. The largest planned detector array, CUPID, consists of about 1500 individual Li₂¹⁰⁰MoO₄ detector modules, with further scaling envisioned for a follow-up experiment (CUPID-1T). In this article, we present a novel detector concept targeting this second stage, using a low-impedance TES-based readout for the Li₂MoO₄ absorber. This design is easily mass-produced and supports multiplexed readout. We describe the detector design and results from a first prototype operated at the NEXUS shallow underground facility at Fermilab. The detector is a 2-cm-side cube with a mass of 21 g, strongly thermally coupled to its readout chip, allowing rise-times of approximately 0.5 ms. This is more than an order of magnitude faster than current NTD-based detectors and is expected to effectively mitigate backgrounds caused by pile-up of two independent two-neutrino decay events occurring close in time. With a baseline resolution of 1.95 keV (FWHM), these performance parameters extrapolate to a background index from pile-up as low as 5 × 10⁻⁶ counts/keV/kg/year in CUPID-sized crystals. The detector was calibrated up to the MeV region, demonstrating sufficient dynamic range for 0νββ searches. In combination with a SuperCDMS HVeV detector, this setup also enabled a precision measurement of the scintillation time constants of Li₂MoO₄, revealing a primary component with a fast ~20 μs time scale. 

Various dark matter search experiments employ phonon-based crystal detectors operated at cryogenic temperatures. Some of these detectors, including certain silicon detectors used by the SuperCDMS Collaboration, are able to achieve single-charge sensitivity when a voltage bias is applied across the detector. The total amount of phonon energy measured by such a detector is proportional to the number of electron-hole pairs created by the interaction. However, crystal impurities and surface effects can cause propagating charges to either become trapped inside the crystal or create additional unpaired charges, producing nonquantized measured energy as a result. A new analytical model for describing these detector response effects in phonon-based crystal detectors is presented. This model improves upon previous versions by demonstrating how the detector response, and thus the measured energy spectrum, is expected to differ depending on the source of events. We use this model to extract detector response parameters for SuperCDMS HVeV detectors, and illustrate how this robust modeling can help statistically discriminate between sources of events in order to improve the sensitivity of dark matter search experiments. 

Despite the ubiquitous presence of tactile actuators (tactors) in mobile devices, there is a continuing need for more advanced tactors that can cover the entire frequency range of human tactile perception. Broadband tactors can increase information transmission and enrich sensory experience. The engineering challenges are multifold in that the ideal tactors should exhibit an effective bandwidth of at least 300 Hz, small form factor, robustness, power efficiency and low cost. For wearable applications, there are the additional challenges of ease of mounting and maintaining adequate skin contact during body movements. We propose an approach to interleave narrowband tactile stimuli to achieve broadband effects, taking advantage of the limited spatial resolution of the skin on the torso and limbs. Three psychophysical experiments were conducted to assess the validity of this approach. Participants performed pairwise discriminations of two broadband stimuli delivered using one or two tactors. The broadband stimuli consisted of one mid-frequency and one high-frequency component delivered through one tactor by mixing the two components, or through two tactors (one component per tactor). The first two experiments revealed extraneous cues such as localization and mutual masking of mid- and high-frequency components that were subsequently eliminated in the third experiment. Results from 12 participants confirmed that performance on pairwise comparisons was below the discrimination threshold, confirming that broadband haptic effects can be achieved through narrowband tactors placed within the skin’s two-point limen.